Home » Products » Smart Level Sensors » CANBUS Output (J1939) » S5-250 CANBUS/J1939 Compliant for Accurate Telemetry SAE-5 Flange Mount Fuel Level Sensor

S5-400 CANBUS output SAE-5 hole flange mount fuel level sensor, J1939 compliant

S5-250 CANBUS/J1939 Compliant for Accurate Telemetry SAE-5 Flange Mount Fuel Level Sensor

Key characteristics
• Single 2-wire CAN H/L connection; 250 kbps or 500 kbps baud rate auto-detect
• 9–36 V DC supply, reverse-polarity and load-dump protected (ISO 7637)
• 304 SS stem, FKM float, IP67 over-molded head: impervious to vibration, salt spray, and pressure washers
• Plug-and-play: standard 9-pin Deutsch DT or M12 connector; no calibration after swap
• Real-time diagnostics—sensor status, temperature, and cable health are part of every frame
• Firmware flashable over CAN for future parameter updates without removal


Availability:



Inquire Add to Basket

A CAN Bus signal level sensor utilizes the Controller Area Network (CAN) protocol to transmit data. It measures liquid or gas levels and converts this data into digital signals for transmission over a CAN network. This enables easy integration with electronic control units (ECUs) in automotive and industrial settings. Known for its robustness, the CAN protocol ensures reliable communication in noisy environments and supports long-distance data transmission. These sensors are often used for real-time fuel level monitoring in vehicles, providing crucial data to the vehicle's control systems.

CANBUS/J1939 Compliant level sensor fuel level sensor SAE-5 Flange Mount Level Sensor Accurate Telemetry level sensor Construction equipment tank sensor Marine CANBUS level sensor Diesel generator fuel sensor High-precision CAN sensor CANBUS fuel monitoring system Fuel Tank Level Sender

Related Products

BSP 1 1/2" Thread in Type Stainless Steel 316 Water Tank Level Sensor for Marine Fuel Tank

TN-250 Generator Multi-pipe Fuel Level Sensor with Fuel Pick-up And Fuel Return for Power Generator

TN family multi-pipe fuel level sensor with fuel pick-up and fuel return for power generator

Top-mounted Dual-float for Low Level And High Level Alarm Control Switch for Bio-fuel/bio-diesel Powered Genset

Improved-cosmetic S5-200 Stamping Head SAE-5 Bolts Level Sensor

S5-350 4-20mA output 21mm-in-resolution level sensor with built-in PCB on the head unit for telemetry

S5-200 4-20mA Output 21mm-in-resolution Level Sensor with Built-in PCB on The Head Unit for Vehicle Fleet Management

S5-250 stainless steel 304 fuel tank level sensor of resistive output for commercial vehicle and genset

S5-200 Stainless Steel 304 Fuel Tank Level Sensor of Resistive Output for Commercial Vehicle And Genset

SAE-5 Hole Flange Pattern Mechanical Level Sensor And Gauge for Transfer Tank & Holding Tank

M45*2 Thread-in Type Mechanical Level Gauge for Genset Fuel/water Tank

NPT 1 1/2" thread-in type mechanical spiral content gauge for small vehicles

S5-350 High-Resolution 4-20mA Current Output Stainless Steel 304 Probe And Float Level Sensor for Bio-diesel Tank

Generator BSP 1 1/2“ Thread in 200mm in Length Empty To Full Mechanical Level Spiral Content Gauge

Steel/aluminum Welding Adaptor/flange for Mechanical Level Gauge Mounting

SAE-5 Bolts Flange Mounting NBR Gasket with Screws for Mechanical Level Gauge Mounting

UL Certificated AWG#18 #20 #22 #24 Cable Harness for Level Sensor

S5-170HL SAE-5-Hole Flange Mount Float Type resistive output Level Sensor for Diesel-engined Automotive

model #	S5-250
Length	250mm from the bottom to the edge of head unit, 110mm~3000mm is customizable
Material	stainless steel probe and NBR float
Output	CANBUS, J1939
Resolution	21mm in resolution (default)
Float dimension	35*32 NBR
Mounting	SAE-5 hole flange
Cable length	default length is 460mm without connector; length is customizable

S5-250 CANBUS/J1939 Compliant for Accurate Telemetry SAE-5 Flange Mount Fuel Level Sensor

Related Products

Quick Links

Products

Industries

Contact Us