Yala ji hakɛ sɛgɛsɛgɛlikɛlan bɛ se ka baara kɛ RO ji la wa?

Sensɔrɔlan jɔnjɔnw ɲɛfɔli ji saniyalenba siratigɛ la, o bɛ kɛ sababu ye ka ɛntɛrinɛti jaanba dɔ jira min bɛ kɛ tuma bɛɛ, o ye kabako ye. I bɛ se k’a miiri i yɛrɛ la ko switch basigilen o basigilen bɛna ji sɔrɔ minɛn kɔnɔ. Nka, baara kɛli ni a ji hakɛ ɲininikɛlan min bɛ taa ni ji ye Reverse Osmosis (RO) ji la, o bɛ to fili jɔnjɔn na. O bɛnbaliya tilennen in bɛ Bɔ jilamaw ka fɛnɲɛnamafagalanw (physique) basigilen na. Ni i ye sensɛri suguya jugu fɔ, o bɛ na ni nkalon kalanni faratilenw ye i ka yɔrɔ bɛɛ la. Aw bɛ farati lase pɔnpe jalen jugumanba ma, jidagayɔrɔw falenni, ani jɔli barikama min ma labɛn. Ni i ka sensɛriw ma ɲɛ, i ka fɛn dilanni taabolo bɛɛ bɛ sɔgɔ ka jɔ. Nin barokun in bɛ fɛɛrɛko jateminɛ gɛlɛn dɔ kɛ min b’a jira mun na sensɛriw bɛ dɛsɛ sigida saniyalenw na. An bɛna fɛɛrɛ wɛrɛw jira minnu bɛ se ka kɛ walasa ka RO sitɛmu jɛ-ka-baara dafalenw kɛ. I bɛna a dɔn cogo min na i bɛ se ka fɛn ɲuman sugandi jidagayɔrɔ hakɛ sɛgɛsɛgɛli walasa ka aw ka baarakɛcogo infɔrɔmasiko lakana.

Takeaways (Takeaways) kunbabaw

• Fiziki dantigɛli : RO ji bɛ fɛnɲɛnamafagalanw ni ionw bɔ minnu ka kan ka kɛ walasa ka kuran ta, a jɔyɔrɔba bɛ kɛ i n’a fɔ insulator sanni ka kɛ conducteur ye.

• Faratiba minnu bɛ dɛsɛ la : Ni aw ye sonda ɲɛminɛbagaw bila RO tankiw kɔnɔ, o bɛ to ka kɛ sababu ye ka 'tanki lankolon' taamasiyɛn nkalonmaw sɔrɔ, o bɛ na ni pɔnpe jeni walima sistɛmu dabɔli ye.

• Fɛn wɛrɛw minnu sɛgɛsɛgɛra : Sensɔrɔlan minnu bɛ kɛ ni masinw ye (PP float level switch) ani minnu tɛ ɲɔgɔn sɔrɔ (ultrasonic/optical) olu ye izini sariyaw ye ji saniyalenba baarakɛcogo la.

• Fɛnɲɛnɛmako koɲɛw : Ji hakɛ ɲininikɛlan ɲuman sugandili RO ji kama, o bɛ a ɲini ka kemikɛliw ka bɛnkan bila jɔyɔrɔ fɔlɔ la (misali la, Poliporopilini walima PTFE) walasa ka ji saniyalen bali ka don ji la.

1. Gɛlɛya koloma: Mun na RO ji bɛ se sɔrɔ conductivity kan

Aw ka kan ka fɛnɲɛnɛmafagalanw ka mekanikiniw faamuya walasa k’a dɔn mun na u bɛ dɛsɛ yan. O minɛnw bɛ baara Kɛ ni kuran sariyakolo nɔgɔmanba ye. U bɛ u jigi da lamini ji kan pewu walasa ka kuran sɛrɛkili dɔ datugu. Taabolo bɛ baara kɛ ni nin fɛɛrɛ kɛrɛnkɛrɛnnenw ye:

1. Kontrɔla min sirilen bɛ ɲɔgɔn na, o bɛ wulicogo dɔgɔman dɔ kɛ nɛgɛdaga fɔlɔ dɔ la.

2. Ji hakɛ bɛ wuli ka maga farikolo la, a bɛ maga fɔlɔ ni duguma elekitorode fila bɛɛ la.

3. Iyɔn minnu bɛ wuli hɔrɔnya la jilama kɔnɔ, olu bɛ kuran ta ka tɛmɛ o yɔrɔ la.

4. Circuit bɛ ban, ani controleur bɛ ji sɔrɔli sɛbɛn.

O ɲɔgɔndan in bɛ tali Kɛ kosɛbɛ ionw hakɛ la. Reverse osmosis kɛcogo bɛ Total Dissolved Solids (TDS) bɔ ni timinandiya ye fo ka se 99% ma. O membrane bɛ kalisiyɔmu, manje, soja ani kɔgɔ suguya caman bɔ u la. O fɛn kɛrɛnkɛrɛnnenw bɛ ion hɔrɔnmaw di minnu ka kan ka kɛ walasa ka kuran fɛn o fɛn ta. Ni u tɛ yen, ji bɛ kɛ kuran-minɛn ye a jɔyɔrɔba la.

An bɛ Se k’o ion dɛsɛ jugu in Kɔlɔsi ni ji-yɔrɔ-ko-dakunw sumalen ye. A ka c’a la, pɔnpeji min bɛ kɛ ka kɛɲɛ ni sariya ye, o bɛ se ka kɛ microSiemens 100 ni 500 cɛ santimɛtɛrɛ kelen na (μS/cm). O sumanikɛlanba in bɛ kafoda datugucogo garanti min bɛ se ka da a kan. O ni RO ji saniyalen tɛ kelen ye kosɛbɛ, a bɛ to ka jigin 10 μS/cm duguma. Ni aw bɛ ji sanuman suguya II walima suguya III ɲɛnabɔ, a ka ca a la, sumanikɛlan bɛ jigin 1 μS/cm duguma. O bɛ sigida dɔ Dabɔ min bɛ juguya pewu ni sonda jɔnjɔnw ye.

Tablo 1: Conductivity Versus Resistivity Threshold Data (Kɛnɛyako ni ɲɔgɔndan dantigɛli).

Fɛɛrɛtigi caman b’a ɲini ka fɛɛrɛ faratilen dɔ kɛ walasa ka o ko ɲɛnabɔ. U bɛ controleur sensitivité dial maximiser walasa ka ultra-low conductivity kalan. An b'o Weele ko 'sensitivity hack' fili. Cranking up the sensitivity bɛ switching kɛcogo juguba lawuli. Sistɛmu bɛ daminɛ ka wale kɛ ni lamini nɛnɛ ye tanki kunkolo yɔrɔ kɔnɔ. A bɛ daminɛ siɲɛ caman ka bɔ yɔrɔ misɛnninw sɔgɔli la. Surface condensation bɛ relay sensitivew lafili nɔgɔya la. Aw tɛ ji hakɛ yɛrɛ suman tuguni. I bɛ lamini jisuma suman dɔrɔn. O wale jugu in bɛ garanti di sistɛmu kɛcogo ma min tɛ se ka fɔ ka ɲɛ waati kɔnɔ.

2. Baarakɛcogo farati minnu bɛ sɔrɔ baara kɛli la ni Sensɔrɔlan jugu ye RO Sistɛmuw kɔnɔ

Sensɔrɔlan jugu bilali baara la, o bɛ bonya joona ka kɛ masinko kɔlɔlɔ juguw ye. Kalan jugu nkalonmaw bɛ wariko gɛlɛyaba jira baarakɛyɔrɔw ɲɛmɔgɔw bolo. Ni ji sanuman ma se ka kuran sɛrɛkili dafa, o sitɛmu bɛ kalan lankolon. Kɔlɔsilikɛla b’a miiri ko ji si tɛ minɛn kɔnɔ. O kɔfɛ, a bɛ yamaruya di jiginni pɔnpew ma u ka baara kɛ ni ji bɛrɛ tɛ u la. O dɛsɛ kɛrɛnkɛrɛnnen bɛ kɛ sababu ye ka pɔnpe jalen tiɲɛni kɛ.

RO lase pɔnpe minnu bɛ tansiyɔnba la, olu bɛ u jigi da tɛmɛji kan kosɛbɛ walasa ka kɔnɔna nɛnɛ. U mago bɛ o ji in na fana walasa ka masin tulu kɛ. Ni aw ye nin pɔnpe sɔngɔ gɛlɛn ninnu boli ka ja, o bɛ kɛ sababu ye ka kɔnɔnafili kojugu. Kɔnɔnafɛnw bɛ wuli joona. Motɛri sigilanw bɛ jeni ka da funteni jugumanba kan. I laban na, i bɛ musakabaw sɔrɔ fɛn caman cili la ani ka baarakɛyɔrɔ jɔli waati janya.

Kalan ɲuman nkalonmaw bɛ kɛ sababu ye ka ko kɛlenw kɛ minnu bɛ tiɲɛni kɛ o cogo kelen na baarakɛyɔrɔ la. Kɔnɔnafili bɛ to ka ɲɔgɔn sɔrɔ nɛgɛdagalanw ni ɲɔgɔn cɛ minɛn datugulenw kɔnɔ. N’i ​​bɛ baara Kɛ ni ‘kontrɔla-minɛnw ye minnu bɛ Se ka ‘sèn Bɔ kosɛbɛ, o jikuru kelen in bɛ danfara in Dabɔ. Kontrɔla bɛ o jikuru fitinin in kɔrɔ fɔ o yɔrɔnin bɛɛ la ko a ye tanki dafalen ye. A bɛ teliya ka taamasiyɛn di fɛn minɛyɔrɔw ma walasa u ka da ka kɔn a waati ɲɛ. O cogo kelen na, ni fɛn misɛnninw kɛra dugukolo kan, o bɛ se ka o sistɛmu lafili walasa a ka minɛn fa kojugu. Kontrɔla bɛ a janto a mankan yɛrɛ la ani a bɛ yamaruya di ko a ka to ka fa. O bɛ sanjiba farati faratilenw lase aw ka baarakɛyɔrɔ dugumalanw bɛɛ ma. I bɛ ji sanuman sɔngɔ gɛlɛn galɔn ba caman fana tiɲɛ.

sariya labatoli ni jogoɲini bɛ tɔɔrɔ kosɛbɛ o cogoyaw la. Bi izini caman bɛ u jigi da batch integrity gɛlɛn kan, min tɛ tiɲɛ. Furakɛyɔrɔw bɛ taabolo kɔlɔsili dafalen de wajibiya. Dumuni ni minfɛnw feereyɔrɔw bɛ baara kɛ lakana sariya gɛlɛnw kɔnɔ. Laboratowari sigicogo bɛ dilan hakɛ tigitigiw de wajibiya. Nivo sensing erratic bɛ compromise kɛ i ka batch kelen-kelen bɛɛ la. Sensɔrɔlan min tɛ se ka da a kan, o bɛ baarakɛcogo sariyalenw tiɲɛ tuma bɛɛ. Aw bɛ farati la ka ban batch dafalen na. Tuma caman na, sariyasunbatigiw bɛ ɲangili juguw di o wale kɛrɛnkɛrɛnnenw dɛsɛw ma.

3. Fɛɛrɛ wɛrɛw jateminɛni: Ji hakɛ sɛgɛsɛgɛli ɲuman RO Ji kama

Aw ka kan ka fɛɛrɛw sugandi minnu lakananen don pewu kuran sɛnɛcogo caman yeli la. An b’a ɲini kosɛbɛ ko u ka fɛn wɛrɛw fara ɲɔgɔn kan minnu sɛgɛsɛgɛra, minnu sinsinnen bɛ fizikikow kan. Ka fɛn bɛnnenw sɔrɔ ji hakɛ ɲininikɛlan min bɛ kɛ RO ji la, o bɛ baarakɛcogo sabatili sabati waatijan kɔnɔ.

Masina furakɛli bɛ dannaya kabakoma di sigida saniyalenw ma sisan. E PP float level switch bɛ kɛ izini sariya fɔlɔ ye bi. Nin Poliporopilini magɛnni sɛgɛsɛgɛlikɛlan ninnu bɛ fɛn caman cili fɛɛrɛ di min bɛ se ka kɛ kosɛbɛ. U bɛ 'kɔnɔnafili gɛlɛya Tɛmɛ n'u y'u jigi Da farikolo-ɲɛnajɛ-yɔrɔ bɛɛ kan. Magɛnni-flɔti min bɛ mɛn, o bɛ wuli dɔrɔn jilama kɛrɛfɛ. O kɔfɛ, a bɛ kɔnɔna sɛgɛsɛgɛlikɛlan dɔ daminɛ min datugulen don ni hermetique ye.

• Nafa minnu bɛ u la: U bɛ waso kosɛbɛ dannayaba la ani waleyali musaka ka dɔgɔ kosɛbɛ. U bɛ to u farikolo la pewu ji saniya jiginni fɛn o fɛn na.

• Nafa tɛ u la: U bɛ farati mikoroskɔpi ta ka ɲɛsin fɛnɲɛnamafagalanw sɔgɔli ma waati kɔnɔ. Nka, sɔgɔsɔgɔninjɛ jugumanba bɛ to ka dɔgɔya kosɛbɛ RO ji la min filɛra ka ɲɛ.

Kɔrɔɲɔgɔnmaya tɛ min na, o bɛ fɛɛrɛ ɲuman wɛrɛ di, min bɛ se ka kɛ ka ɲɛ kosɛbɛ. Ultrason ni radar sensɛriw ka fisa ni baara ye minnu bɛ labɛn kosɛbɛ, minnu bɛ saniya. Saniya sigidaw bɛ farikolo-ɲɛnajɛ dɔɔnin de wajibiya ni a bɛ se ka kɛ tuma o tuma. Aw man teli k’a fɛ kɛnɛma yɔrɔw ka maga aw ka fura saniyalen na. Sensɔrɔlan minnu tɛ ɲɔgɔn sɔrɔ, olu bɛ mankanw walima rada wulilenw wuli ka bɔ ji sanfɛ. U bɛ jatebɔ kɛ hakɛ janya tigitigiw kan ka da segin-ka-bɔnye waati kan.

Aw ka kan ka nin sensɛriw jateminɛ minnu tɛ ɲɔgɔn sɔrɔ ka kɛɲɛ ni aw ka yɔrɔ sariya kɛrɛnkɛrɛnnenw ye. U bɛ musaka fɔlɔ musaka camanba de wajibiya min bɛ se ka kɔlɔsi. U bɛ yecogo jɛlen ni saniyalen fana ɲini ka taa ji sanfɛla la min bɛ duguma. Kɔnɔna tanki kɔnɔna na, fɛn o fɛn bɛ se ka bali, o bɛna mankan taamasiɲɛ jɛnsɛn. Nka, u bɛ kɔlɔsili kɛ 4-20mA la min bɛ to senna. O bɛ kunnafoni tigitigiw di i ma, minnu bɛ kɛ waati yɛrɛ la, sanni ka kɛ fɛn nɔgɔmanw sɛgɛsɛgɛli ye.

Sensɔrɔlan minnu bɛ nivo optique ye, olu bɛ baara kɛ cogo dafalen na walasa ka fɛn kɛrɛnkɛrɛnnenw, minnu ka dɔgɔn. U bɛ baara kɛ ni yeelen infrarouge (infrarouge) sɛgɛsɛgɛli tigitigi ye walasa ka ji sɔrɔli dɔn. Glass walima polisulfone prisma fitinin dɔ sigilen bɛ sensɛri kuncɛ la. Ni ji ye o prisma in datugu, kɔnɔna yeelenbɔlan bɛ biri ka bɔ a minɛbaga la. O yeelen tɛ min na, o bɛ kɛ sababu ye ka cogoya caman Changer o yɔrɔnin bɛɛ. Sensɔrɔlan ɲɛnamaw bɛ to ka ɲɛ ji saniyalen misɛnninw na. U fana bɛ baara kɛ ka ɲɛ kosɛbɛ i n’a fɔ bɔgɔdaga dɔnni dancɛw fɛnɲɛnamafagalan filananw kɔnɔ.

4. Jidagayɔrɔ hakɛ sɛgɛsɛgɛlikɛlan dɔ Spec cogo min na saniyalenba baarakɛcogo la

Fɛnɲɛnɛmafagalan ɲumanw sugandili bɛ tɛmɛ kɔnɔnajɛya kɛcogo dɔrɔn kan. Aw ka kan ka fɛnw bɛncogo jateminɛ kosɛbɛ sani aw ka a bila laban na. Industri baarakɛlaw bɛ to ka RO ji wele ko 'kɔngɔ ji' kun ɲuman kosɔn. Saniyacogo min bɛ taa ɲɛ, o bɛ fɛnɲɛnamafagalanw bɛɛ bɔ u yɛrɛ la. Ji min bɛ sɔrɔ o la, o b’a ɲini ni fanga ye ka ionw sama ka segin a yɛrɛ kɔnɔ. A bɛna nɛgɛw bɔ teliya la ka bɔ masinfɛnw na minnu ma ɲɛfɔ ka ɲɛ.

Aw ka kan ka aw yɛrɛ tanga kosɛbɛ nɛgɛso fɛnw ma minnu bɛ kɛ ka kɛɲɛ ni sariya ye o sigida saniyalenw na. Aw kana baara kɛ abada ni nɛgɛ inox ye min ka dɔgɔn RO tanki baarakɛta kɔnɔ. O nɔ na, ​​aw bɛ fɛnw bila jɔyɔrɔ fɔlɔ la minnu tɛ baara kɛ kosɛbɛ yɔrɔw bɛɛ la minnu ɲiginnen don. An b’a ɲini aw fɛ kosɛbɛ ko aw ka Poliporopilini (PP) walima PTFE (Teflon) sow ɲɛfɔ. Ni aw ka degun hakɛw bɛ nɛgɛ ɲini, aw bɛ 316L Stainless Steel dɔrɔn de sugandi min sɛgɛsɛgɛlen don. Nin fɛn fisaman ninnu bɛ jibɔ jugumanba kɛlɛ ani ka aw ka ji saniya gɛlɛn mara.

Mounting configurations fana bɛ i ka sensor sugandili laban fɔ. Aw ka kan ka sanfɛla-yɔrɔ ni kɛrɛfɛ-yɔrɔ sigicogo jateminɛ koɲuman. Aw ye aw ka tanki jateminɛ kɛrɛnkɛrɛnnenw lajɛ ani a lamini ladonni dondaw. Sanfɛla sensɛriw bɛ baara kɛ ka ɲɛ minɛnw minɛyɔrɔ jugumanw na, minnu ka surun kosɛbɛ. U bɛ wiri nɔgɔlenw to yɔrɔ jan na lafiya la ka bɔ kɛrɛfɛfɛnw na minnu bɛ se ka kɛ. Kɛrɛfɛ-switchw bɛ bɛn kosɛbɛ tankiw kɔnɔ minnu man dun walima minnu janya dantigɛlen don. U b’a to fana ladonni kɛcogo kɔrɔlenw sɔrɔli ka nɔgɔn. Fɛɛrɛtigiw bɛ se k’u ladon k’a sɔrɔ u ma tanki datugulan girinmanw bɔ minnu ka gɛlɛn.

Kuran doni jateminɛw nafa ka bon o cogo kelen na ɲɛfɔli waati la. Aw ka kan ka danfara don PLC donna min ka dɔgɔn, o jiginni ni pɔnpe motɛri wulicogo tilennen cɛ. Reed switch standard min bɛ plastiki flot kɔnɔ, o bɛ 24V DC PLC signal minɛ nɔgɔya la. A bɛ baara kɛ ni kuran miliampɛri dɔrɔn ye. Nka, a bɛna wuli o yɔrɔnin bɛɛ ni aw y’a ɲini ka 120V AC pɔnpe motɛri wuli k’a ɲɛsin a yɛrɛ ma. Inductive doni girinmanw bɛ relais intermédiaire walima contacteur mécanique de wajibiya tuma bɛɛ. Aw bɛ aw ka switch hakɛ tigitigiw bɛn tuma bɛɛ ni aw ka yɔrɔ ka kuran ɲinini yɛrɛyɛrɛw ye.

5. Waleya waleyali tiɲɛkow ani Laseli kalanw

Hali sensɛri minnu ka ɲi kosɛbɛ, olu bɛ tiɲɛ ni u bilara cogo jugu la. Ji wulicogo baarakɛtaw ɲɛnabɔli bɛ i ka rollout gɛlɛya fɔlɔ jira. Float switches ani optical sensors bɛ se ka pan kungo kɔnɔ fasa yɔrɔw la minnu bɛ ɲagami. Ji lamaga teliya la, o bɛ kɛ sababu ye ka sensor relay (sensɛri relay) wuli ka wuli ani ka faga joona. O toggling frantic bɛ i ka pɔnpe girinmanw tiɲɛ ani k’i ka logic controllers ɲagami. An b’a ɲini aw fɛ kosɛbɛ ko aw ka kɔlɔnw sigi minnu bɛ kɛ ka mɔgɔw ladamu. Kɔlɔn min bɛ lafiya, o ye PVC pipe ye min bɛ sɔgɔsɔgɔ dɔrɔn, min bɛ sensɛri farikolo lamini. A bɛ ji sanfɛla lafiya o yɔrɔnin bɛɛ la sonda nɔgɔlen lamini na.

Aw bɛ se fana ka ɲagami koɲɛw ɲɛnabɔ porogaramuw caman cili fɛ. Aw ye jateminɛ kɛ ka PLC debounce timers baara aw ka logic controller kɔnɔ. Debounce timer bɛ controleur wajibiya ka segin damadɔ makɔnɔ sani a ka sɔn farikolo cogoya caman yeli ma. A tɛ a janto taamasiyɛnw wulicogo teliya la, minnu bɛ kɛ waati dɔɔnin kɔnɔ. O porogaramu nɔgɔman farali in bɛ masin relay cycling teliya bali kosɛbɛ.

Redundancy kɛcogo ɲumanw bɛ amateur setups ni professionnel engineering deployments fara ɲɔgɔn kan. Fɛnɲɛnɛmako kɔrɔlenw bɛ masinw ka dɛsɛw de wajibiya tuma bɛɛ. An bɛ lafasali kɛ kosɛbɛ fɛɛrɛ fila-fila fɛɛrɛ barikama kan. Ka i jigi da dɛsɛ yɔrɔ kelen kan, o bɛ mɔgɔ bila ka balawu laban na. Aw bɛ ultrasonic monitor (kɔlɔsilikɛlan min bɛ to sen na) sigi aw ka nivo fɔlɔ kɔlɔsili baara kama. O kɔ, aw bɛ masin-float switch (switch) dɔ sigi min bɛ ni nɛgɛ gɛlɛn ye, aw bɛ aw ka fasa sira nɔgɔman sanfɛ dɔɔni. O masin-float filanan in bɛ kɛ i n’a fɔ kɔrɔtɔko dadon laban min bɛ sanfɛ. Ni ultrasonic sensor fɔlɔ dɛsɛra pewu, flotteur bɛ fɛn dɔ bali min bɛ se ka kɛ balawu ye.

Ladonni jigiya ka kan ka to tiɲɛ na kosɛbɛ hali ni sigida saniyalen don. Ji sanuman bɛ kɛ sababu ye ka kɔnɔna jidagayɔrɔw saniya dɔɔnin waati tɛmɛnen kɔfɛ. Nka, hali bi i mago bɛ sɛgɛsɛgɛli kɛcogo la min bɛ kɛ cogo la min bɛ kɛ cogo la min bɛ kɛ cogo la min bɛ kɛ ka kɛɲɛ ni sariya ye, min ka gɛlɛn. Fɛɛrɛtigiw ka kan ka masinw ka pankurunw lajɛ ni u sirilen don farikolo la kalo wɔɔrɔ o kalo wɔɔrɔ. Aw bɛ kɛnɛma wiring jakite bɛɛ lajɛ ni kemikɛlifɛnw tiɲɛna walima ni u funteni karilen don. Aw ka kan fana ka aw ka kɔrɔtɔko sɛgɛsɛgɛlikɛlanw sɛgɛsɛgɛ ni aw bolo ye. Aw bɛ u daminɛ ni bolo ye walasa ka a dɔn ko alarmaw bɛ fɔ tiɲɛ na. Ladonni kunbɛnni musaka ye warijɛ dɔrɔn ye ni i y’a suma ni fɛn dilanni yɔrɔ ye min falen bɛ ji la.

Kuncɛli

Sonde conductives ni RO ji saniyalen bɛ to u cogo la min tɛ bɛn ɲɔgɔn ma. Osmosis kɔsegin kɛcogo bɛ ion nafamaw bɔ ni timinandiya ye minnu ka kan ka kɛ kuran tacogo la. K’a ɲini ka nin sensɛri sariyalen ninnu wajibiya ka baara kɛ, o bɛ baarakɛcogo farati lase mɔgɔ ma min tɛ sɔn. Baara kɛli ni 'sensitivity hack' ye, o bɛ na ni kalan nkalonmaw dɔrɔn ye, ka pɔnpew tiɲɛ, ani ka fɛn dilanni dugumalanw falen.

Aw ka kan ka furaw bila jɔyɔrɔ fɔlɔ la minnu bɛ bɛn fiziki ma aw ka yɔrɔ la. An bɛ ladilikan di kosɛbɛ ɛntɛrinɛti injiniyɛriw ni yɔrɔw ɲɛmɔgɔw ma, u k’u ka sisan RO marayɔrɔw jateminɛ joona. Aw bɛ sonda conductive (sonda conducteurs) minnu tiɲɛna, aw bɛ olu dɔn ani ka u falen sani u ka kɛ sababu ye ka sistɛmu jɔli jugumanba lase. Aw bɛ aw ka fɛnsɔrɔsiraw sɛmɛntiya ni masin flotteur ye min bɛ se ka da a kan walima ni sensor ultrasonic advanced ye. Aw bɛ nin minɛn kura ninnu bɛn kɛrɛnkɛrɛnnenya la aw ka saniya hakɛ wajibiyalenw ma ani baarakɛcogo musakaw ma. Ka fɛɛrɛw tigɛ bi, o bɛ taabolo lakanani ni baarakɛcogo ɲuman sabati waatijan kɔnɔ.

Ɲininkaliw

J: Conductivity minimum min ka kan ka kɛ standard conductive level sonda la, o ye mun ye?

A: Relay conductif standard fanba bɛ 10 fo 50 μS/cm de wajibiya walasa ka baara kɛ ni dannaya ye. O basigi in b’a to kuran sɛrɛkili bɛ se ka da jibɔyɔrɔ la. A ka c’a la, reverse osmosis ji bɛ bin o dancɛ in jukɔrɔ kosɛbɛ, a ka ca a la a bɛ suman 1 μS/cm jukɔrɔ, o bɛ kɛ sababu ye ka sonda standard conductives kɛ nafa tɛ u la.

J: Yala ne bɛ se ka dɔ fara dɔrɔn sensitivity kan n ka conductive probe controller kan RO ji kama wa?

A: Hali ni sɛgɛsɛgɛlikɛlan dɔw bɛ yen minnu bɛ se ka sɛgɛsɛgɛli kɛ kosɛbɛ, ka sensitivite gɛrɛntɛ fo ka se a dan na, o bɛ basigibaliya jugu lase. O sigida bɛ kɛ fɛn ye min bɛ se ka kɛ fɛn nkalonmaw ye minnu bɛ bɔ watara wulilen na, jidagayɔrɔ jiginni na, walima sonda nɔgɔ misɛnninw na. A tɛ fura ye min bɛ se ka da a kan waatijan kɔnɔ izini sigidaw la.

J: Mun na PP float level switch ka fisa RO jibolisiraw ma?

A: Poliporopilini (PP) ye fɛn ye min tɛ baara kɛ ni kemikaliya ye kosɛbɛ. A tɛna nɔgɔ ɲininenw walima nɛgɛ nɔgɔlenw bɔ RO ji saniyalen na, 'kɔngɔ bɛ min na' kɔnɔ. O tɛmɛnen 'kɔ, a ka masin-baara bɛ Da ji-yɔrɔ-ko kan kosɛbɛ. O b’a To a tɛ Se ka ji ka kuran-sɔrɔbaliya bɛɛ Lakana pewu.

J: Yala sensor capacitive bɛ baara kɛ reverse osmosis ji la wa?

A: Ɔwɔ, capacitive sensors bɛ se ka RO ji dɔn ka ɲɛ ka tɛmɛn tanki kogow fɛ minnu tɛ nɛgɛ ye. U bɛ u jigi da dielektriki caman cili kan sanni u ka u jigi da kuran jiginni tilennen kan. Nka, u bɛ jateminɛ kɛ ni hakilijagabɔ ye kosɛbɛ u sigili sen fɛ. U bɛ se ka nɔ jugu bila fana ni sigida funteni caman yeli ye walima ni kɛnɛma jidagayɔrɔ jiginni gɛlɛn ye.