Ɛnyɛ sensor no ankasa nko na tank a wotumi de ho to so a wɔbɛhwɛ so no gyina sɛnea wɔde si hɔ na wɔde susuw ho nso so. BI nsuo level probe sensor betumi ama detection a ɛyɛ den yiye ama tank, reservoirs, ne mfiridwuma nnwinnade, nanso nhyehyɛe a enye a wɔde si hɔ anaasɛ calibration a ɛnteɛ betumi ama nsɛnkyerɛnne a ɛnteɛ, pɔmpɛ adi huammɔ, anaasɛ alarm a wɔnhwɛ kwan aba. Field nsɛm pii a ɛte sɛ nea ɛyɛ sensor sintɔ ahorow no fi mounting position mfomso, wiring haw, anaasɛ reference points a wɔankyerɛkyerɛ mu yiye. Sɛ yɛte sɛnea wɔde nsuo dodoɔ nhwehwɛmu sensor ahodoɔ besisi hɔ yie ne sɛdeɛ wɔbɛkari no yie a, ɛma nhyehyɛeɛ no de adwumayɛ a ɛkɔ so daa ma. Saa akwankyerɛ a mfasoɔ wɔ so yi kyerɛkyerɛ ahosiesie anammɔn titire, akwan a wɔfa so de si hɔ, akwan a wɔfa so yɛ calibration, ne sɔhwɛ nneyɛeɛ a ɛboa ma wɔdan sensor a ɛnyɛ den ma ɛbɛyɛ control point a wotumi de ho to so wɔ tank monitoring system mu.
Nea ɛsɛ sɛ wohwɛ ansa na woafi ase instɔlehyɛn
Si tank no nsusuwii ne susudua a wobetumi de adi dwuma no so dua
Ansa na wɔde sensor bɛhyɛ mu no, ɛsɛ sɛ wɔte tank no honam fam su ase pefee. Tank no sorokɔ na ɛkyerɛ probe tenten a ɛho hia ma detection point no. Tank ahorow bi hwehwɛ sɛ wohu wɔ baabi a ɛkorɔn anaasɛ ɛba fam nkutoo, bere a afoforo nso hia mmeae pii a wɔde di dwuma.
Sɛ wosusuw tank no mu dɔ ne nsu a wobetumi de adi dwuma no pɛpɛɛpɛ a, ɛboa ma wɔhwɛ hu sɛ wɔde sensor no asi baabi a ɛfata. Sɛ nhwehwɛmu no yɛ tiaa dodo a, ebia ɛrennu baabi a wohu no da. Sɛ ɛware dodo a, ebetumi atwitware tank no ase anaa nneɛma a ɛwɔ mu no mu.
Bluefin Sensor Technologies Limited de probe tenten a wotumi sesa ma sɛnea ɛbɛyɛ a sensor no betumi ne tank no nsusuwii pɔtee a wɔde di dwuma wɔ nsukorabea nhyehyɛe, mfiridwuma mu coolant tank, anaa mfiri a wɔde yɛ adwuma mu no ahyia.
Kyerɛ nsu tebea horow, a foam, sediment, ne turbulence ka ho
Nsuo su di dwuma titiriw wɔ sensor adwumayɛ mu. Nsukorabea betumi ayɛ ahurututu, nsu a ɛyɛ fĩ, anaa nneɛma nketenkete a ɛsensɛn hɔ a egyina faako a nsu no fi ne baabi a wɔyɛ adwuma no so.
Foam layers betumi ama atoro nsɛnkyerɛnne aba sɛ wɔde sensor no bɛn baabi a basabasayɛ ba no dodo a. Sediment a ɛboaboa ano wɔ tank no ase nso betumi asiw detection kwan sɛ wɔde probe no si fam dodo a.
Sɛ yɛte nsu no nneyɛe ase a, ɛboa ma wohu baabi a ahobammɔ ne nea ɛyɛ den sen biara a wɔde te nka wɔ tank no mu.
Fa sensor output no toto afiri a egye anaa controller no ho
Ansa na wobɛhyɛ aseɛ ahyɛ aseɛ no, ɛho hia nso sɛ wobɛsi signal interface a monitoring system no de di dwuma no so dua. Ɛsɛ sɛ nea efi sensor no mu ba no ne mfiri a egye no hyia, sɛ́ ɛyɛ controller, alarm unit, anaa pump automation system no.
Application ahorow bi de switch outputs a ɛnyɛ den di dwuma ma high anaa low level detection. Ebia afoforo nso behia nsɛnkyerɛnne a ɛne control panels anaa monitoring systems hyia.
Sɛ wohwɛ sɛ nsɛnkyerɛnne no hyia bere a wɔreyɛ nhyehyɛe a, ɛkwati nsakrae a wɔbɛyɛ wɔ wiring mu na esiw nkitahodi ho nsɛm ano bere a wɔde ahyɛ mu akyi.
Sɛnea wobɛpaw gyinabea a ɛfata a wode besisi
Nea enti a bottom contact, sidewall interference, ne turbulence ma atoro akenkan ba
Beae a sensor bi si so no na ɛkyerɛ sɛnea ebetumi ahu nsu dodow no pɛpɛɛpɛ. Sɛ nhwehwɛmu no ka tank no ase a, ebia nsu a ɛyɛ fĩ anaa nneɛma a asɛe betumi asiw ano. Sidewall interference nso betumi aka sensor mmuae sɛ wɔde probe no bɛn tank nhyehyɛe no dodo a.
Nsuo a ɛyɛ basabasa a pɔmpɛ anaa nsuo a ɛkɔ mu no de ba no betumi ama mpɔtam hɔ nsuo a atwa sensor no ho ahyia no akɔ soro anaa akɔ fam bere tiaa bi. Sɛ wɔde probe no si mmeae a entumi nnyina yi a, ebetumi ama nsɛnkyerɛnne a ɛsakrasakra aba.
Sɛ wopaw beae a ɛne nsu a ɛkɔ tẽẽ nkɔ baabiara a, ɛma wotumi de ho to so yiye.
Sɛnea ɛsɛ sɛ wogyaw fi mmeae a nsu a ɛyɛ fĩ anaa nneɛma a asɛe no te
Tank dodow no ara boaboa nkae anaa nsu a ɛyɛ fĩ bi ano wɔ baabi a ɛbɛn ase. Esiane eyi nti, ɛsɛ sɛ wɔde sensor ahorow a wɔde hu nneɛma a ɛba fam no si tank no ase atifi kakra.
Sɛ wokura clearance a ɛdɔɔso mu a, ɛboa ma buildup no ntumi nsiw probe no kwan. Ɛsan nso ma sensor no tumi hu nsu dodow ankasa sen sɛ ɛbɛyɛ n’ade wɔ nsu a ɛtɔ gu fam ho.
Bere a vertical mounting yɛ nea eye
Wɔtaa de vertical mounting di dwuma efisɛ ɛma probe no trɛw kɔ nsu no mu tẽẽ na ɛkɔ so gyina bere a ɛreyɛ adwuma no. Saa kwan a wɔfa so kyerɛ ade yi ma sɛnea ɛbɛyɛ a ɛbɛka tank afasu anaa emu adan ho no so tew.
Vertical installation nso ma nsiesie yɛ mmerɛw efisɛ mpɛn pii no wobetumi ayi sensor no afi tank no atifi de ahwɛ anaasɛ wɔasiesie.
Anamɔn biara a wɔde hyehyɛ nhyehyɛe
Siesie mounting port, flange, anaa threaded entry no
Installation fi ase denam ahosiesie tank opening baabi a sensor no bɛhyɛ. Ɛsɛ sɛ bue no ne thread anaa flange type a probe sensor no de di dwuma no hyia.
Ɛsɛ sɛ nea wɔde nsɔano no ho tew na nneɛma a asɛe biara nni mu na ama wɔahwɛ ahu sɛ nkitahodi a ɛmma nsu nkɔ mu. Nneɛma a ɛfata a wɔde kata tank no so boa ma wɔbɔ tank no ho ban na ɛma nhyehyɛe no yɛ nea ahobammɔ wom.
Fa probe no bɔ ho ban na bɔ cable kwan no ho ban
Sɛ wɔyɛ mounting port no wie a, wobetumi de ahwɛyiye de probe no ahyɛ tank no mu. Ɛsɛ sɛ wɔkyekye sensor no denneennen sɛnea torque a wɔakyerɛ no te sɛnea ɛbɛyɛ a ɛbɛkɔ so agyina bere a ɛreyɛ adwuma no.
Cable routing yɛ ade foforo a ɛho hia wɔ instɔlehyɛn mu. Ɛsɛ sɛ wɔbɔ nhama no ho ban na mfiri nsɛe no na wɔde si baabi a ɛwɔ akyirikyiri fi mmeae a ebia ɔhyew anaa wosow a ɛboro so betumi akɔ mu.
Cable a wɔhwɛ so yiye no ma ahotoso a wɔde bere tenten yɛ no tu mpɔn.
Hwɛ sɛnea sealing, connector fit, ne mfiri a ɛgyina pintinn
Sɛ wɔde probe no hyɛ mu wie a, ɛsɛ sɛ nea ɔde si hɔ no hwɛ sɛ nneɛma a wɔde hyɛ mu no nyinaa asi hɔ yiye na wɔde nkitahodi ahorow no abata ho denneennen.
Ɛsɛ sɛ sensor no kɔ so gyina hɔ pintinn a ɛnkeka ne ho dodo. Mfiri a wɔde gyina pintinn no hwɛ hu sɛ nhwehwɛmu no kɔ so ne beae a wɔpɛ sɛ wohu no hyia bere a wɔreyɛ adwuma no.
Wiring mfitiaseɛ a ɛka signal quality
Tumi, asase, ne output wiring a ɛho hia
Wiring a ɛteɛ ho hia na ama sensor no ayɛ adwuma pɛpɛɛpɛ. Ɛsɛ sɛ wɔde anyinam ahoɔden a wɔde ma, asase so nkitahodi, ne sɛnkyerɛnne a ɛba no nyinaa bata ho sɛnea sensor no nkyerɛkyerɛmu te.
Wiring a ɛmfata betumi asiw sensor no kwan sɛ ɛremfa nsɛnkyerɛnne a wotumi de ho to so nkɔ anaasɛ ebetumi de nsɛm a ɛfa detection ho aba bere ne bere mu.
Kwati sɛ wobɛkwati terminal ahorow a ɛyɛ hare ne anyinam ahoɔden dede
Electrical terminals a ɛyɛ loose betumi ama nsɛnkyerɛnne a entumi nnyina a ɛte sɛ nea ɛte sɛ calibration mfomso ahorow aba. Ɛlektrik dede a efi mfiri a ɛbɛn hɔ mu nso betumi asiw sensor nsɛnkyerɛnne kwan sɛ wɔanbɔ nhama no ho ban yiye a.
Nkitahodi a ahobammɔ wom ne cable routing a ɛfata a wobɛhwɛ so no boa ma wosiw nsɛm yi ano.
Nea enti a wiring a ɛnteɛ no betumi ayɛ te sɛ calibration haw
Sɛ signal wiring no nyɛ nokware a, nhyehyɛe no betumi akyerɛ mmuae a ɛkyɛ anaasɛ switching suban a wɔnhwɛ kwan. Wɔtaa di mfomso bu saa sɛnkyerɛnne ahorow yi sɛ ɛyɛ calibration haw ahorow.
Mpɛn pii no, sɛ wɔhwɛ sɛ wiring nkitahodi ahorow no yɛ nokware a, esiesie asɛm no a wɔnyɛ nsakrae foforo biara.
Sɛnea wɔde calibrate nsu level probe sensor yiye
Fa reference point a hwee nni mu no si hɔ
Calibration fi ase denam nkyerɛkyerɛmu a ɛba fam sen biara a wɔde hwɛ tank no so. Saa beae yi gyina hɔ ma tebea a tank no mu da mpan anaasɛ ɛwɔ adwumayɛ gyinabea a ɛba fam koraa no.
Sɛ wode saa nkyerɛkyerɛmu yi si hɔ a, ɛma control system no te bere a tank no adu baabi a ɛba fam a ɛho hia no ase.
Set dwumadibea a edi mũ anaasɛ botae no
Anamɔn a edi hɔ ne sɛ wobɛkyerɛkyerɛ tank no level anaa adwumayɛ anohyeto a edi mũ mu. Eyi ne beae a ɛsɛ sɛ pɔmpɛ ahorow gyae anaasɛ ɛsɛ sɛ alarm ahorow yɛ adwuma na amma nsu a ɛbɛboro so.
Sɛ wode saa aboboano yi si hɔ yiye a, ɛma tank no yɛ adwuma yiye na ɛbɔ nnwinnade ho ban.
Hwɛ sɛ switching thresholds anaa output mmuae no yɛ nokware
Sɛ wɔkyerɛkyerɛ nsɛntitiriw a wɔde gyina so no mu wie a, ɛsɛ sɛ nea ɔde si hɔ no hwɛ sɛ sensor no bua wɔ nsu dodow a ɛfata mu.
Sɛ wosɔ switching thresholds no hwɛ a, ɛma sensor no ne control system no di nkitaho yiye.
Sɛnea wobɛsɔ sensor no ahwɛ bere a wode ahyɛ mu awie no
Fa nsu a ɛkɔ soro ne nea ɛkɔ fam ho mfonini
Ɛsɛ sɛ sɔhwɛ yɛ nsu dodow a ɛkɔ soro ne nea ɛso tew nyinaa ho mfonini. Wobetumi ayɛ eyi bere a wɔrehyɛ tank mu ma anaasɛ denam nsu a wɔahyɛ so a wɔde bɛka ho bere a wɔrefi nhyehyɛe no ase no so.
Sɛ wohwɛ sensor nneyɛe wɔ tebea horow yi mu a, ɛkyerɛ sɛ beae a wohu no yɛ pɛpɛɛpɛ.
Fa sensor mmuae toto tank tebea ankasa ho
Ɛsɛ sɛ nea ɔde hyɛ mu no de sensor no output toto nsu dodow a wotumi hu wɔ tank no mu no ho. Saa ntotoho yi hwɛ hu sɛ sensor mmuae no ne tebea ankasa no hyia.
Sɛ abirabɔ da adi a, ebia ɛho behia sɛ wɔyɛ nsakrae nketenkete wɔ instɔlehyɛn no sorokɔ anaa calibration nhyehyɛe no mu.
Kyerɛw nhyehyɛe ahorow a wode besiesie daakye na wode asi ananmu
Nsiesiei a etwa to no a wɔbɛkyerɛw ato hɔ no yɛ anammɔn a ɛho hia a wɔtaa bu ani gu so. Probe tenten, mounting sorokɔ, ne switching thresholds a wɔkyere gu kasɛt so no ma daakye nsiesie yɛ mmerɛw.
Sɛ ɛho hia sɛ wɔsesa sensor no da bi a, saa kyerɛwtohɔ ahorow yi ma mfiridwumayɛfo tumi san yɛ nhyehyɛe koro no ara ntɛmntɛm.
Mfomso a ɛtaa ba wɔ instɔlehyɛn ne calibration mu
Ɛtɔ mmere bi a wɔn a wɔn ho akokwaw mpo hyia nsɛmnsɛm bere a wɔde sensor rehyɛ mu no. Mfomso a ɛtaa ba no ntease boa ma wosiw ɔhaw ahorow a ɛho nhia ano aduru.
Mfomsoɔ |
Nea ebia nea ɔde di dwuma no bɛhyɛ no nsow |
Ɛbɛyɛ sɛ ɛde ba |
Nsiesiei a wɔkamfo kyerɛ |
Probe a wɔde ahyɛ mu a ɛbɛn tank ase dodo |
Nsɛnkyerɛnne a ɛba fam a ɛnyɛ nokware a ɛtaa ba |
Sediment a ɛtwetwe nneɛma |
Ma instɔlehyɛn no sorokɔ so |
Sensor a ɛbɛn inlet pipe |
Nsɛnkyerɛnne a ɛsakrasakra |
Nsu a ɛyɛ basabasa |
Fa probe no kɔ baabi a ɛhɔ yɛ komm |
Wiring a ɛnteɛ |
Nsɛnkyerɛnne biara nni hɔ anaasɛ output a entumi nnyina |
Terminal ahorow a wɔabɔ no yiye |
Hwɛ sɛ wiring mfonini no yɛ nokware |
Calibration a wɔyɛɛ no pɛnkoro pɛ |
Nsakrae a ɛnteɛ bere a wɔreyɛ adwuma no |
Tebea horow sesae bere a wɔde ahyɛ mu akyi |
San sɔ hwɛ na gye tom wɔ tebea horow ankasa mu |
Awie
Sɛ wɔde si hɔ yiye na wɔde susuw ho a, ɛkyerɛ sɛ ebia tank monitoring system yɛ adwuma wɔ ɔkwan a wotumi de ho to so anaasɛ ɛma nsɛnkyerɛnne a entumi nnyina. A wɔde ahyɛ mu yiye liquid level probe sensor ma detection a wotumi de ho to so a ɛbɔ pumps ho ban, ɛma tank levels yɛ den, na ɛboa automated control systems. Sɛ wɔkyerɛkyerɛ tank no kɛse, beae a wɔde besisi, ne sɛnkyerɛnne a wɔhwehwɛ mu pefee a, wobetumi asiesie sensor no ma ɛne application no ahyia pɛpɛɛpɛ. Bluefin Sensor Technologies Limited yɛ nhyehyɛe na ɛyɛ dade a ɛnyɛ den nhwehwɛmu sensor ne float switch ano aduru ma tank monitoring ne automation nhyehyɛe. Sɛ woreyɛ nhyehyɛe sɛ wobɛhyehyɛ foforo anaasɛ woreyɛ tank control system a ɛwɔ hɔ dedaw no foforo a, di yɛn ho nkɔmmɔ na yɛne wo nsusuw wo application no ho na hwehwɛ sensor nhyehyɛe a ɛfata.
FAQ
1. Bere tenten ahe na egye na wɔde nsu a ɛwɔ nsu mu nhwehwɛmu sensor ahyɛ mu?
Bere a wɔde besisi hɔ no gyina tank no kwan a wɔfa so kɔ ne wiring a ɛyɛ den so, nanso wobetumi awie installation dodow no ara wɔ bere tiaa bi mu bere a wɔasiesie mounting port ne wiring connections no.
2. So wobetumi de nsuo a ɛwɔ nsuo mu nhwehwɛmu sensor ahyɛ nsukorabea a nsuo a ɛtɔ gu mu mu?
Yiw, nanso ɛsɛ sɛ wɔde probe no si sediment layer no atifi kakra na wɔakwati sɛ wɔrensiw detection kwan.
3. Dɛn nti na me nsu dodow nhwehwɛmu sensor no ma nsɛnkyerɛnne a entumi nnyina?
Nsɛnkyerɛnne a entumi nnyina betumi afi basabasayɛ a ɛbɛn sensor no, nhama a ɛnteɛ, anaasɛ wɔde si beae a ahuru anaa nneɛma a asɛe aka no mu aba.
4. Mpɛn ahe na ɛsɛ sɛ wɔhwɛ calibration?
Ɛsɛ sɛ wɔhwɛ sɛ calibration no yɛ nokware bere ne bere mu, titiriw bere a wɔayɛ nsiesie adwuma, nhyehyɛe no foforo, anaa nsakrae a aba wɔ adwumayɛ tebea mu akyi.
